.jpg)
Aluminum Foil Roll for Insulation
Uncoated aluminum foil refers to aluminum foil that has not been subjected to any surface treatment, but has been rolled and annealed. The heat sink used in many countries is still uncoated aluminum foil, which accounts for a relatively high proportion in China.
There is an anti-corrosion protective layer on the surface of the corrosion-resistant aluminum foil. Air conditioner heat exchange fins can be used in harsher environments, and the service life is significantly improved. Delay the corrosion rate, due to the reduction of corrosion powder, it also makes the ventilation effect better and the air quality better.
The performance of hydrophilic aluminum foil is related to the angle of surface water. The common angle is less than 35°, and the hydrophilicity is good. Hydrophilic aluminum foil is generally used in evaporators of air conditioners. The main function of the evaporator is that when the water vapor becomes water droplets, the water droplets are easier to disperse. So as not to block the work of the heat exchanger, make the air conditioner more efficient and energy-saving
Self-lubricating aluminum foil means that there is no need to add lubricants during the production process. Compared with the traditional way of adding lubricant, the quality is higher and will not cause harm to the human body. The film on the surface of the aluminum foil plays a lubricating effect during the stamping production process. Since no special lubricating oil is required, subsequent cleaning and drying procedures are omitted.
Aluminum foil hoses also have many uses, supported by spiral steel wires. Use Mylar to bond the upper and lower layers of the steel wire together to enhance adhesion and tension. Its maximum withstand voltage is 250MMWG, and the standard length is 10M.
Aluminium Foil Roll 8011 For Heat Dissipation has good thermal conductivity, low density, and is not easy to oxidize
