(1).jpg)
Aluminum Foil 80 Micron For Flexible Duct Manufacturing
Introduction of Aluminum Foil 80 Micron For Flexible Duct Manufacturing hose: It is mainly suitable for high pressure, medium pressure, low pressure central air conditioning and ventilation systems and places with high noise requirements. It is a combination of noise absorption and insulation. This product is made of aluminum foil composite film, glass fiber cloth and steel wire composite winding It is a square flexible telescopic tube with good flame retardant properties.
A building material with thin steel wire as the skeleton and covered with aluminum foil, used for high-rise building ventilation, such as used in central air conditioning. Another is to use two layers of aluminum foil filled with glass wool, so that it can be The air plays a role in thermal insulation, so this kind of hose is also called thermal insulation hose. Its specifications are: ten centimeters, fifteen centimeters, twenty centimeters, etc.
The aluminum foil air duct is made of stretched pure aluminum foil, which is continuously and tightly compressed by a spiral. Due to the oxidizing properties of aluminum materials, a layer of glue is generally coated during production to isolate the aluminum material from the oxidation reaction of oxygen in the air.
The main purpose of the aluminum foil air duct is to use it as air duct ventilation at the end air supply stage on the fresh air system
Product thickness is generally between 0.08 to 0.2MM. According to the size of the spinning tool, it is theoretically possible to make an aluminum foil air duct with an infinite diameter. However, according to the actual application, the inner diameter is generally within the range of 60 to 200MM, and the length is within 10 meters.
Aluminum Foil 80 Micron For Flexible Duct Manufacturing
Temperature: -30℃+150℃ 4. Steel wire: 0.8-1.4mm 5. Flow rate: 28M/S
Features:
1. Covered with Mylar reinforced aluminum foil, supported by spiral steel wire, Mylar
The aluminum foil is bonded to the upper and lower layers of the steel wire to strengthen the adhesion and tension.
2. High flexibility and flexibility, easy construction.
Uses: General vacuuming and exhausting, bathroom exhausting
Aluminum Foil 20 Micron Alloy 8011 Soft Temper The intermediate annealing process of 8011 aluminum alloy was studied through the intermediate annealing test of 8011 aluminum alloy.
