.jpg)
Aaluminium foil raw material
Generally, houses with heated floors are suitable for use with aluminum foil. Aluminum foil is used for heat insulation and prevents deformation at high temperatures, but the floor must also be resistant to high temperatures. As for the thickness, generally 3mm is used. If it is too thick, it will make you feel noisy when stepping on the floor. It is not easy to use too thick, just appropriate.
The purpose of laying aluminum foil paper in floor heating construction is to reflect infrared rays through the aluminum foil paper to minimize the heat loss from the floor heating pipe. If there is no reflection of this layer of aluminum foil, more heat will be transferred and consumed through the floor. It is used to reflect the infrared radiation generated by the floor heating pipe. Infrared radiation is a kind of heat transfer. As long as all objects have a temperature, they will produce infrared rays, which can be tens of degrees below zero. Like a fire, the infrared radiation transfers heat energy, which is harmless.
Floor heating aluminum film is a paving material on floor heating, also known as reflective film. Does the market have any effect on laying aluminum film now? There are different opinions, but as long as the aluminum film is selected, it will still have a certain effect. The function of the aluminum film: 1. Make the floor heating evenly dissipate heat and improve the comfort of the floor heating; 2. Heat preservation. It has long been proved through practice: in the ground radiation heating system, the heat transfer is mainly radiation, followed by convection, and finally conduction. If the heat dissipation ground is covered with aluminum foil to form reverse radiation, the thermal resistance of the foam pad with aluminum film is large while the temperature of the floor heating surface is the same, while the thermal resistance of ordinary foam pads is small. Obviously, ordinary foam pads have better heat conduction effect than foam pads with aluminum film, which is more conducive to heat conduction from the floor to the room. Therefore, it is recommended that you choose ordinary foam cushions or cushions of materials with low thermal resistance, moisture resistance and corrosion resistance when purchasing underfloor heating.
Foil Aluminum Jumbo Roll 8011 Household Specification The output of aluminum foil is extremely scarce, and aluminum foil naturally became the most expensive packaging material at that time
