7 Micron Aluminum Foil For Lamination

7 Micron Aluminum Foil For Lamination

7 Micron Aluminum Foil For Lamination are commonly used for material lamination and flexible packaging. Alloys include 1235, 8011, 8079. This application requires strict surface finish and strength.Be careful when buying, don't just care about the price, but also check the TDS to make sure the brush is level and the pinhole goes through. We can provide aluminum foil thickness from 0.006-0.2mm and width from 50-1730mm. Alloys including 8011, 8079, 1235 are widely used in packaging materials industry, containers, composite materials, electrical engineering and electronics, printing, etc.About the material Aluminum sheet products may be scratched on the surface after shearing, handling and logistics.There are scratches. Customers with high surface requirements need to explain in advance.Confirm and place an order. Aluminum plate has thickness tolerance, please confirm with customer service before placing an order Dimensional tolerance, whether the surface is filmed, packaging and other requirements.
In the process of producing 7 Micron Aluminum Foil For Lamination, when oil is applied to the surface of the aluminum foil, it cannot be combined with plastic, especially the aluminum foil used as a base plate. In order to reduce costs, users basically do not go through the cleaning process. Some small enterprises do not even clean the Aluminum foil used for the panel, which puts forward higher requirements for the surface of the aluminum foil: during the rolling process of the aluminum foil, our company takes the following degreasing measures:
(1) Formulate reasonable rolling process parameters and appropriately reduce the Rolling speed;
(2) Use rolling oil with lower viscosity and reasonably control the content of rolling oil additives;
(3) Select reasonable roll grinding parameters;
(4) The degreasing device of the aluminum rolling plant has been transformed into a factory, and additional degreasing measures such as wind power and isolation device have been taken when the finished product is scraped.